Quik Latch Frequently Asked Questions

Are Quik Latch Products Lockable?

The QL-38 series and QL-50 series Quik-Latch hood pin kits have lockable versions available. 

Can I remove my stock hood latch now that I have the Quik Latch system?

For liability purposes, we do not advise removing the factory supplied hood latch.

How much does one Quik Latch set weigh?

One complete non lockable QL-50 series Quik Latch hood pin set weighs 16 ounces (1 pound). 

One complete non-lockable QL-38 series Quik-Latch hood pin kit weights 8 ounces.

One QL-25 series Mini Quik-Latch weighs 1.2 ounces

Do Quick Latch sets come with mounting brackets for the pin studs?

No. Due to the fact that every make and model is different, custom mounting brackets will need to be created to fit the needs of each make and model.

What tools are needed to install a Quik Latch set?

For the QL-50 series hood pin kit, the basic tools that you'll need are (but not limited to):

  • 1 1/2" hole saw 
  • drill
  • 1 1/16" wrench 
  • 3/16" drill bit at least 2" long 
  • 3/32" allen wrench 
  • Center punch & hammer. 
  • Open end wrench set
  • Tape measure
  • masking tape
  •  If you need to fabricate mounting brackets, you will need fabrication equipment as well.

For the QL-38 series hood pin kit, the basic tools that you'll need are (but not limited to):

  • 1 1/4" hole saw 
  • drill
  • 1 1/16" wrench 
  • 3/16" drill bit at least 2" long 
  • Center punch & hammer
  • Open end wrench set
  • Tape measure
  • Open end wrench set
  • masking tape
  • If you need to fabricate mounting brackets, you will need fabrication equipment as well.

For the QL-25 series universal mini Quik-Latches, the basic tools that you will need are (but not limited to): 

  • 3/4" hole saw or unibit
  • 1/4" drill bit
  • drill
  • tape measure
  • marking compound
  • masking tape
  • center punch 
  • hammer
  • If you need to fabricate mounting brackets, you will need fabrication equipment as well.

What hardware is included? 

For the QL-50 hood pin sets: 2 x Quik Latch bodies,  2 x Retaining rings, 4 x 1/2" fine thread stainless steel nuts, 4 x 1/2" inner diameter stainless steel washers, 4 - 10x32x1" set screws,  2 x latch ball pins, thread locker (2 keys are included for lockable QL-50 versions)

For the QL-38 hood pin sets: 2 x Quik Latch bodies,  2 x Retaining rings, 4 x 3/8" fine thread stainless steel nuts, 4 x 3/8" inner diameter stainless steel washers, 2 x latch ball pins, thread locker (2 keys are included for lockable QL-38 versions)

The mini Quik-Latches are sold as individual latches, and include the following with each latch: 1 x Latching Body,  1 x Latching body retaining nut,  1 x mounting ball pin, 2 x washers,  2 x 1/4" nuts

Will Quik Latch products rust?

Quik Latch products are made of T6 aluminum and stainless steel and are highly resistant to corrosion. 


Can Quik Latch Products Be Painted?

Yes, Quik Latch products can be painted. A few sample cars in the 'completed installs' link show how they look when painted.  

What is your return policy?

If for any reason you are dissatisfied with our products, ship them back to us, and we will give you a refund minus a 25% restocking fee. Items must be returned within a 30 day window along with a copy of the receipt which was sent with the shipped unit(s). Quik-Latch.Com is not responsible for shipping charges on returned items that are not defective.